REQUEST-TO-EXIT Red LED Passive Infrared Sensor Available in white or brown enclosure

3. DESCRIPTION AND OPERATION

4. DETECTION PATTERN

5. INSTALLATION

Mounting Procedure

1. Select a mounting location over the center of the door or doors to be covered. The target must walk

directly toward the detector.Mount the detector on the ceiling,wall,or door frame.

2. Remove the front cover from the detector.

3. Route the wiring as necessary through the wiring entrance(refer to the item 3 description and oper- ation).For surface wiring,use the break out wiring entrance on the front cover(at the same end as the wire entrance).

4. Loosely mount the back cover to the mounting sur- face using the supplied mounting screws.

5. Aim the detector for the desired coverage.

6. Mount the front cover on the detector.

Long Range/Short Range Adjustment

The OD-22 can be set to detect individuals at either a long rang(several steps from the door) or at short range (immediately in front of the door).If the build- ing includes a lengthy approach to the exit doorway and no other foot traffic in the area, choose the long range setting.

Setup and Testing

1. Apply power to the unit.

2. Wait at least 3 min for the detector to settle.

3. Test the unit by walking directly throgh the coverage area,to- ward the door.

4. Aim the detector up or down if necessary to obtain the proper coverage.

5. Check that the relay latch time is sufficient Adjust if necessary.

6. After confirming proper operation,replace the cover and walk test one more time to ensure the coverage has not changed.

AIN Technology (Shenzhen) Co., Ltd. is an international enterprise which is exclusively designated and authorized by ALEPH Group to sell ALEPH brand security products, door magnetic switches, and Panther 4000, which is a wireless security systerm. AIN has set up production bases and branches in China (Shenzhen, Zhuhai), Japan, Europe, the United States and many other countries.
ALEPH brand alarm equipment, door magnetic switches and Baoping'an smart home security products which are researched and developed by AIN Technology have been all over the world. Especially the independently researched and developed active infrared intrusion detector which is the first in the world has been leading the development and innovation of the infrared industry for China, even the world.

AIN has a professional R&D team and high-quality management personal, annually invests more than 15% of the operating income in research and development and has two major product series of “ALEPH” and AIN.
AIN has won the honor of a&s Top Ten International Brands for ALEPH security products for many years. Furthermore, AIN is the designate supplier of infrared detection products of Vanke Group. Its products have been widely used in government agencies, airports, nuclear power plants, factories, residential estates and so on.
AIN has passed the following international quality system certifications : ISO9001:2008, ISO14001: 2004 and
QC080000:2012; product certification: CCC, CQC, UL, CE, FCC, etc.