High-Security Wired Outdoor Infrared+Microwave Dual-Tech PIR Motion
Detector for Alarm System XC-1XT
PIR Motion Detector Introduction
The product is wireless intelligent pet-immunity detector with high
stability. It has adopted advanced technology in signal processing,
provided super high detection ability, function of automatically
identify valve control and pulse count. The detector will detect
movement of human auotomatically when intruder pass through the
detector area, and it will send out alarm signal to alarm host if
there is movement. The product suitable for the safety of residential house, villas, factories, markets, warehouses, office
building etc.
| Item | Specification |
| Model | XC-1XT |
| Detection Range | 40ftx56ft (12m×17m) |
| Supply Voltage | 9.5 ~ 16V DC |
| Current Draw | Max. 35mA at 12V DC |
| Detection Method | Passive Infrared + Microwave |
| Infrared Detection | Dual-Element |
| PIR Sensitivity Adjustment | 60%/80%/100%/120%, selectable |
| Infrared Pulse Count | 2 or 4, Selectable |
| Microwave Detection | MIC Module (10.525GHz) |
| Microwave Pulse Count | 2 Pulses |
| Warm-up Time | 50±15S |
| Alarm Output | N.C./N.O. 30V DC, 0.35A Max. |
| Alarm Period | 2±0.4S |
| Alarm Indicator | Red LED (On/Off Selectable) |
| PIR Detection Indicator | Green LED Flashes |
| Microwave Detection Indicator | Yellow LED Flashes |
| Alarm Memory Indicator | Red LED Monitor (On/Off Selectable ) |
| Tamper Switch | N.C. , Open when cover is removed. 30VDC, 0.5A Max. |
| Operating Environment | -26℃ ~ +50℃, Rh.95% Max. |
| Dimensions | 160mm × 70mm × 43.9mm |
| Weight | 180g |
PIR Motion Detector Features
- Pet immunity ;
- Passive infrared and microwave combination detection technology;
Selectable pulse counting (2/4) function;
- Microwave detection range adjustable;
- Selectable single-infrared detection function;
- Alarm output N.O./N.C. selectable;
- Ingress protection of IP65, all-round rubber seal ring, effectively
prote- cting against rain, mist and insect.
How to Install XC-1XT
1. XC-1XT optimum installation height: 2.0m-2.2m
2. How to adjust bracket angle when installation is too high.
3. The detection distance will become short when angle is adjust too
much. (even mounting height >2.2m)
4. Optimal way of detection: to let the object enter the detection
area by the way of transverses as following picture.
5. For these objects in the direction of motion, you may encounter
shorter detection ranges
6. LED light
Green: PIR is sensing the target.
Yellow: MW PIR is sensing the target.
RED: Send out the alarm signal(Both PIR & MW is sensing the target.
7. How to adjust MW range
Remove back cover and find the “MW RANGE ADJUSTMENT”.
Turn clockwise to Increased MW sensitivity.
Turn counterclockwise to reduce the MW sensitivity.
About US
International leading alarm security system, door magnetic
contacts, smart home security products, smart sanitary products
- The security products of AIN which are ALEPH brand receive the
honor of a&s Top 10 International brands for many years
- We are the sole supplier of Vanke Group for photo beam sensors and
our alarm security products have been widely used in the various
real estate projects and property areas
- We take 80% of orders of the large Japanese police companies
- Supply flow sensors to TOTO (smart toilet), NORITZ(gas water
heater) and other customers
- Research and develop the Smart Home Security System AHS-4000 Series
with Thailand Police Department
- Cooperating with the Tokyo City Government to develop Luna Nurse
sensors
- Cooperating with Kyushu Institute of Technology to develop
automatic driving technology
